Lundix It SPC Bridge KNX, Руководство пользователя

Страница: 12 / 25

© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION
AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION OF LUNDIX IT.
SPC Bridge KNX User Manual
Revision 1.0
Page 12 of 25
Reference 2020-111
SPC Account Code ATP Account Code. Must match corresponding key in SPC Panel FlexC settings.
RCT ID RCT Id. Must match corresponding id in SPC Panel FlexC settings.
RCT TCP Port RCT TCP Port. Must match corresponding value in SPC Panel FlexC settings
.
SPC Username and Password Credentials for FlexC communication. User must be defined in the SPC Panel and have a
corresponding web password.
NOTE! Of security reason a saved password is never shown again. Just leave the field
blank if you don’t want to change the password.
4.3 SPC Communication Test
To be sure that the communication between SPC Bridge and SPC panel is working properly you can
use the tests provided in
SPC ->SPC Communication Test . In the option menu you can choose
between query SPC areas, zones or the system log.
4.4 KNX Interface Info (Programming Mode)
Interface -> KNX Interface shows some basic information about the KNX interface and is used to set
the KNX interface in programming mode and change the address.