POWER CABLE:
Use only approved power cables. If you have not been provided with a power cable for your system or for
any AC powered option intended for your system, purchase a power cable that is approved for use in your
country. The power cable must be rated for the product and for the voltage and current marked on
the product’s electrical ratings label. The voltage and current rating of the cable should be greater than the
ratings marked on the product.
DISCONNECT DEVICE:
The plug-IEC socket combination must be accessible at all times, because it serves as the main
disconnecting device. Disconnect the power cord during installation of the device.
SAFETY CLASSIFICATION OF MAINS POWER INPUT:
Mains input - IEC connection has a safety status of PRIMARY CIRCUIT.
SAFETY CLASSIFICATION OF TRAFFIC PORTS:
Serial port and LED extension port has a safety status of EARTHED SELV.
10/100/1000 Base-T ports have a safety status of UNEARTHED SELV.
CAUTION/ SHOCK HAZARD
RISK OF ELECTRIC SHOCK DO NOT OPEN. THIS UNIT HAS MORE THAN ONE POWER SUPPLY.
DISCONNECT ALL SUPPLIES BEFORE SERVICING TO AVOID ELECTRIC SHOCK
ATTENTION/ RISQUE D’ÉLECTROCUTION
RISQUE DE CHOC ELECTRIC NE PAS OUVRIR. CET APPAREIL COMPORTE PLUS D’UN CORDON
D’ALIMENTATION, AFIN DE PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHER LES CORDONS
D’ALIMENTATION AVANT LE DEPANNAGE.
Ok
Power RLinkX
PoE
Mode
WELCOME TO YOUR GIGACORE 30i.
Upon unpacking your new GigaCore 30i, the E-ink display will display a QR-code. After scanning this QR-
code, the safety manual and quick start guide will be opened on the device used to scan the QR code.
Once the device has been powered up and booted, this QR-code will disappear and not come back on a
next boot-up.
Important safety IntructIons
5
