K
2.3 power up the device
Power-up the device with a power cable with IEC connection (K) (please contact your local dealer if you
do not have a suitable power cable at hand). The device will automatically switch on. To shut it down after
use, just unplug the power cable again.
The GigaCore 30i requires standard AC power distribution from 100-240 VAC, 50/60Hz. Current required
depends on the model.
Please use an IEC plug compliant cable to power the device. When installing a new connector, please refer
to the following wire colour code reference:
Wire*
Connection
Green/Yellow
AC Ground
Blue
AC Neutral
Brown
AC Line
* International (Harmonised) Standard
2.2 mounting the device
GigaCore 30i is designed to be rack mounted. Please read the following instructions to make sure the
device is mounted and secured correctly.
RACK MOUNT
The GigaCore 30i is designed to be fitted in a standard 19-inch rack, you need 4 rack screws to mount the
device.
2 | InstallatIon
14
