2.1 Installing/removing psu’s
The GigaCore 30i is equipped with two slots for slide-in power supply units (PSU).
MOUNTING A PSU
Slide a PSU suitable for your setup in PSU slot 1 (left-hand slot).
Make sure the label is at the top!
Secure the PSU with the thumb screw fasteners
(L)
.
MOUNTING A SECOND PSU
Remove the M3x10 TX10 screws
(n)
holding the blind-plate.
Remove the blind-plate.
Slide the second PSU in PSU slot 2 (right-hand side).
Make sure the label is at the top!
Secure the PSU with the thumb screw fasteners
(L)
.
1
2
LUMINEX RECOMMENDS TO ALWAYS USE TWO IDENTICAL MODELS OF PSU WHEN A SECOND PSU IS
FITTED!
n
l
l
12
2. Installation
