RUKRA PHONE LINE SWITCH_ENG
ARTICLE NUMBER: RK-2022
Read this manual carefully before you start with installation or programming
RUKRA EUROPE B.V.
WWW.RUKRA.EU
GENERAL
RUKRA Phone Line Switch is connected between the telephone line and maximum of 3 RUKRA
Elevator Phone’s parallel connected (only two wires).
The RUKRA Phone line Switch is made to make a call from the machineroom to 3 RUKRA Elevator
Phones and you can make a call from the 3 RUKRA Elevator Phones to the machineroom.
It is also possible to program the connected 3 RUKRA Elevator Phone’s
CONNECTIONS
FUNCTIONS
The RUKRA Phone Line Switch works with connected RUKRA Elevator Phones, they must have some
programmable parameters. RUKRA Phone Line Switch can be used to connect one Elevator Phone
(single mode) or for 2 or 3 parallel connected Elevator Phones (parallel mode).
Single mode:
In this mode, only two important parameters: disable
parallel connection
and
call duration
. These
two parameters must be set in the RUKRA Phone Line Switch as well as in the Elevator Phone. It is
also necessary for the correct function to set the same character prolongation call duration and code
for hanging Elevator Phone.
Indication:
Green
LED 1
flashes, green button does not respond.
Function:
After picking up the handset of the telephone the telephone starts to call and then the
RUKRA Elevator Phone picks up the line. Normal call progress. Whenever is allotted time to expire
maximum call duration, so RUKRA Phone Line Switch automatically dial the prolongation character. If
you hang up the phone the Elevator Phone will send hanging code.
