3
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
Model No.: RCK55
Reverse Module Installation (Continued)
2.2: For Ceiling Fan Models CF2400, CF4500,
CF4501, CF4800 and CF4801 ONLY.
5. Remove the Wire Connector joining the Three Blue
Wires (Figure 2).
6. Separate the Ceiling Fan Blue Wire and cap this
Wire using a Wire Connector (supplied) (Figure 2).
On Models CF4500, CF4501, CF4800 and CF4801
ONLY:
Cut the Uplight Switch Yellow Wire and cap
the end of this Wire coming from the Center of the
Motor using a Wire Connector.
On Model CF2400 ONLY:
Remove the Wire
Connector joining the Two Yellow Wires; Cap the
Motor Yellow Wire using a Wire Connector (orange
wire on older models).
7. Remove the Knurled Nut securing the Uplight
Switch to the Switch Housing and Remove the
Uplight Switch.
8. Place the Pull Chain Plug (supplied) in the Switch
Housing exposed Uplight Switch Hole (Figure 2).
PULL
CHAIN
PLUG
UPLIGHT
SWITCH
CUT THE
YELLOW WIRE
AND CAP USING
WIRE
CONNECTOR
SEPARATE BLUE WIRE COMING FROM CEILING
FAN AND CAP USING WIRE CONNECTOR
2
REMOVE WIRE
CONNECTOR
SECURING
THREE BLUE WIRES
1
3
KNURLED
NUT
Figure 2
NOTE: Keep the uplight switch if you think you may
like to return to manual control in the future.
KNURLED
NUT
PULL
CHAIN
PLUG
REVERSE SWITCH
Figure 3
2.3: For Ceiling Fan Models CF3900,
CF4500, CF4501, CF4800 and CF4801
ONLY.
9. Remove Two Screws securing the Reverse
Switch to the Switch Housing (Figure 3).
10. Place the Pull Chain Plug (supplied) in the Switch
Housing exposed Reverse Switch Hole (Figure 3).
CF1 & CF2800 - INSTALL
WIRE CONNECTOR ON
YELLOW WIRE
(
CF2400 - INSTALL WIRE
CONNECTOR ON GRAY WIRE
)
CF1 & CF2800
YELLOW WIRE
(
GRAY ON OLDER
MODELS AND ON
CF2400
)
CAPACITOR
GRAY WIRE
CAPACITOR
Figure 4
2.4: For Ceiling Fan Models
CF1, CF2000 and CF2800 ONLY.
11. Locate the Capacitor Gray Wire which is
connected to the Yellow Wire (gray wire on older
models) coming from the Center of the Motor
(Figure 4).
12. Remove the Wire Connector and separate the
Gray and Yellow Wires.
13. Cap the Yellow Wire using a Wire Connector
(supplied) (Figure 4).
