4
Model No.: RCK55
Reverse Module Installation (Continued)
2.5: For Ceiling Fan Model CF2400 ONLY.
14. Locate the Capacitor Gray Wire which is
connected to the Gray Wire coming from the
Center of the Motor (yellow wire on older
models) (Figure 5).
15. Remove the Wire Connector and separate these
Wires.
16. Cap the Gray Wire coming from the Motor using
a Wire Connector (supplied) (Figure 5).
CF2400 - INSTALL WIRE
CONNECTOR ON GRAY
WIRE
(
CF1 & CF2800 - YELLOW
WIRE
)
CF2400 GRAY WIRE
(
YELLOW WIRE ON
NEWER MODELS
)
CAPACITOR
GRAY WIRE
CAPACITOR
Figure 5
SWITCH
HOUSING
REMOVE
CAPACITOR/
WIRING HARNESS/
SWITCH(ES)
FROM SWITCH
HOUSING
Figure 6
2.6: All Ceiling Fan Models.
17. Separate the Capacitor (held in place with
two-sided tape) from the Switch Housing
(Figure 6).
18. Remove the Wiring Harness and Switch(es)
from the Switch Housing.
NOTE: Keep the wiring harness if you think you may
like to return to manual control in the future.
SWITCH
HOUSING
RECTANGULAR PLUG
PULL CHAIN
SWITCH PLUGS
Figure 7
2.7: All Ceiling Fan Models.
If Not Already Completed:
19. Close the Hole(s) for the Speed Control Switch,
the Uplight Switch, and the Reverse Switch
by installing Pull Chain Plug(s) (supplied)
or Rectangular Plug (supplied) in the Hole(s)
(Figure 7).
Choose the color that best matches your Ceiling
Fan.
