![background image](http://html.mh-extra.com/html/esera-automation/11142/11142_user-manual_2426597001.webp)
Art. No. 11142
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11142 V2.0 R1.0 Manual
Page 1 of 4
User Guide
ESERA Extender 3
Distribution Module / Patch field
for 1-Wire Bus system
Performance characteristics
Distributor for 1-Wire Network
7 terminals (push-in) for network cable
1 modular socket for cabling with CAT network
cable
Patch field for star topology,
Star-shaped cabling (connected in parallel)
Housing for DIN rail mounting
Typical fields of application
Central 1-Wire Network distributor
Sub-distributor for 1-Wire Network
Laboratory equipment, scientific equipment
1
Introduction
Before you start assembling the 1-Wire Extender 3 and putting the device into operation, read these operating
instructions carefully until the end, especially the section referring to safety instructions.
2
Product description
We call the product a 1-Wire Extender or distribution module. However, the terms patch panel, extender, data
distributor or terminal board are also used.
The 1-Wire Extender 3 is intended as a distributor for 1-Wire networks. The 7 push-in terminals mean that no
tools are required for connection. The 1-Wire Extender 3 greatly accelerates and extremely simplifies the
installation and cabling of 1-Wire networks. The 1-Wire Extender 3 can be used, for example, as a central
distributor after a bus coupler / controller or 1-Wire Hub.
Equipped with an 8-pole modular socket, several 1-Wire Extensions 3 can be elegantly connected by CAT
network cable can be connected via a 1-Wire Extension 2 distributor.
The 1-Wire Extension 3 is ideally suited for sub-distribution boards or floor distributors in combination with DIN rail
modules.
The various 1-Wire extenders form a coordinated cabling system.
For coupling to control systems, we recommend the use of an ESERA 1-Wire Controller. This simplifies the
software connection enormously due to the many automatic functions.
No software is required for this module.