This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warranty
Customer Support
*Please have your invoice and
order ID ready before contacting
Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
Support Hours
Monday – Friday
9:00 am – 5:00 pm PST/PDT
Email:
Toll-Free:
(855) 686-3835
A0-01.00_S_22H04_us retail
High Capacity 550 Pound
Digital Body Weight Scale
Model Line: EBS-151
Scan Here to Receive Exclusive News
Your product comes with 2 years of warranty, starting
from the date of purchase.
1.
Scan the QR code or visit etekcity.com/warranty.
2.
Enter your purchase info to receive exclusive
news.
3.
Learn about our quality customer support and
gain easy access to warranty information.
Quick Start Guide
Tap
+
in the VeSync app.
4
Note:
•
You can change the scale’s
in-app name and icon at any
time in the smart weight scale
settings.
•
When the scale display turns
off, the scale’s Bluetooth will
disconnect and go into auto-
off mode. However, when the
scale display lights up and the
app is opened to the device
page, the scale will reconnect
to Bluetooth.
Note:
You can tap on the product
categories to jump to different
sections of the device list.
To download the free
VeSync app, scan the QR
code or search “VeSync”
in the Apple App Store
®
or Google Play Store.
Note:
•
This scale does not use the
VeSyncFit app.
•
Please make sure your
firmware and software are
up to date.
•
The VeSync app is continually
being improved and may
change over time. If there are
any differences, follow the
in-app instructions.
Select your smart scale
from the device list.
Follow the in-app
instructions to complete
setup.
Make sure your phone
has Bluetooth
®
turned on.
3
1
Open the VeSync app.
Log In
or
Sign Up
.
2
Log In
Sign Up
6
In-app
Instructions
5
Select
Smart Scale
Select
Federal Communication Commission Interference
Statement
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. To maintain compliance with FCC RF exposure compliance
requirements, please follow operation instructions as documented in this manual. This
transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
Etekcity Corporation hereby declares that this equipment is in compliance with the FCC
rules. The declaration of conformity may be consulted in the support section of our
website, accessible from www.etekcity.com
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
