Your Luminance Brands Ceiling Fan may be used with
a SR600 or SR650 Remote Control, a SW605 Wall
Control, and a RCK55 6-speed Receiver. The remote
control or wall control is designed to control your
ceiling fan speed, airflow direction, and light intensity.
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box
or circuit breaker panel before installing the
accessory.
WARNING
!
C
D
E
A
B
1.1: Package Contents
Remove Parts and check to see that you have
received all the following Parts and Hardware.
The RCK55 Receiver carton contains the following:
2
Model No.: RCK55
2.1: All Ceiling Fan Models.
1. Remove and retain the Screws securing the
Housing Cover to the Switch Housing (Figure 1).
2.
All Ceiling Fan Models.
Disconnect the Motor
Connector from the Wiring Harness Connector
(Figure 1).
3. Unscrew the Knurled Nut securing the Speed
Control Switch to the Switch Housing
(Figure 1).
4. Place the Pull Chain Plug (supplied) in the Switch
Housing exposed Speed Control Switch Hole
(Figure 1).
HOUSING COVER
(TYPICAL)
SCREWS (2)
KNURLED
NUT
SPEED
CONTROL
SWITCH
PULL
CHAIN PLUG
REVERSE SWITCH
SWITCH
HOUSING
CAPACITOR
MOTOR
CONNECTOR
WIRING
HARNESS
CONNECTOR
Figure 1
IMPORTANT
It is important that you also follow the installation
instructions contained in the Owner’s Manual
supplied with your Remote/Wall Control and Ceiling
Fan. Pay close attention to the Safety Instructions
and WARNING notes.
Part Description
Quantity
A
RCK55 Receiver
1
B
Reverse Module
1
C
Wire Connectors
7
D
Pull Chain Switch Plugs
4
E
Switch Plugs, Rectangular
2
Reverse Module Installation
Unpacking Instructions
