Lumi IML Connector, Руководство пользователя

Страница: 8 / 54

IML Connector
Page 8
4. Licensing
A battery powered, timed USB HASP ‘dongle’ is used for preventing unlicensed use of Lumi
software as well as providing a level of security for the owner of the IML Connector System.
The information contained within a licensing dongle is used to allow the use of specific Lumi
software and to enable certain features and functions within it. The licence will also limit the
number of IML Connector devices that may be used as part of the system.
a) Plug the dongle into any available USB port on the control
PC. A red LED will light up inside the casing. If the LED is
flashing, wait until it is solid before proceeding. If it is the
first time the dongle has been used with the PC, new
hardware will be detected and device drivers installed.
b) The HASP device drivers are pre-installed onto a PC with any
Lumi software.
c) The dongle must remain connected to the control PC for the
IML Connector devices to function.
d) Licensed dongles can be updated with new functionality and
timing information without having to be returned to Lumi.
e) The licence will expire at a certain date and time. Users
need to ensure it is updated before re-using.
f) When required, an update file is generated by Lumi and
sent to the user.
The IML Connector System will not operate
without a valid licensing dongle
.
Important
Lumi recommends that the dongle is kept in
a safe and secure place when not being
used, and that it is insured to the value of a
replacement licence.
Tip