Lumi IML Connector, Руководство пользователя

Страница: 12 / 54

IML Connector
Page 12
6. Switching On
›
Method 1
a) If an IML Connector device is switched off, it can be turned
on manually via the device’s keypad.
b) Press and hold the green button.
c) The LED will turn green, when indicated on the display
screen, press the microphone key.
d) If the microphone button is not pressed in time, the IML
Connector device will not turn on and both steps need to be
repeated.
›
Method 2
a) Turn on the control PC and wait for it to finish starting up.
b) Make sure the dongle is plugged into the control PC and
that the IML Connector Base Station is connected and
switched on.
c) Ensure that the Base Station has initialised (users will see
the words “ BASE STATION ” on the display screen and the
status LED will be blue).
d) With power connected, turn the IML Multidock or IML
Minidock ON and wait for the IML Connector devices to go
through the boot up process.
e) Remove the IML Connector devices from the dock. The
devices will stay turned on whilst they search for radio
signal from the IML Connector Base Station. Once they
have found this and have connected, the devices will stay
on.
f) The status LED on the IML Connector device will blink (a
quicker, double flash) when it is turned on. It will blink red
if it is on but not connected to an IML Connector Base
Station and will blink green if it is on and is connected to the
Base Station. The slower, single flash indicates a device is
charging.
An IML Connector device will turn off
automatically after approximately 2 minutes if
it does not connect to an IML Connector Base
Station. Once an IML Connector device has
connected to the Base Station it will not turn
off. A device which is or has been connected
can only be turned off manually or by using
Lumi software
.
Important