Lumi IML Connector, Руководство пользователя

Страница: 40 / 54

IML Connector
Page 40
23. Safety, Maintenance & Compliance Information
Safety
IML Connector Devices:
›
Only charge IML Connector devices in an IML Minidock or IML Multidock.
›
Do not expose the product to moisture. Never spill any liquid on the product.
IML Multidock:
›
Use only the type of power source indicated on the marking labels.
›
Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is
frayed, replace it with a new one.
›
Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on
the device, which are intended for ventilation and proper operation.
›
Do not place the product near any source of heat or expose it to direct sunshine.
›
Do not expose the product to moisture. Never spill any liquid on the product.
›
Do not place the product on an unstable stand or table.
›
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
›
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Maintenance
IML Connector Devices:
›
Do not attempt to disassemble or open covers of this unit, nor attempt to service the product (which may void the user’s authority to
operate it). Contact qualified Lumi service personnel under the following conditions:
a) If liquid has been spilled into the product.
b) If the product has been exposed to rain or water.
c) If the product does not operate normally when the operating
instructions are followed.
d) If the product has been dropped or the casing has been damaged.
e) If the product exhibits a distinct change in performance.