manualshive.com logo in svg

LUMENIS PULSE 100H, Руководство оператора

Поделиться
Скачать
LUMENIS PULSE 100H Скачать руководство пользователя страница 62

Lumenis

®

 Pulse

TM

 50H / 100H Laser Systems 

Change the Debris Shield Optic

UM-20006520DE, Rev. A

Page 62

Change the Debris Shield Optic

1.

Use snap ring pliers to remove the snap ring that secures the debris 
shield optic to the body of the shield.

2.

Carefully turn over the debris shield holder, and allow the debris 
shield optic and spring washer to drop onto a lens cleaning tissue.

3.

Open the vial containing the new debris shield optic.

CAUTION:

To avoid contamination, do not touch the surface of the debris shield optic 
with your fingers.

4.

Carefully turn over the vial, and allow the optic to drop onto a lens 
cleaning tissue.

5.

Lay the debris shield over the new debris shield optic.

6.

Hold the lens cleaning tissue over the debris shield optic opening, and 
slowly turn over the debris shield until the optic is facing up.

7.

Place the spring washer over the debris shield optic.

8.

Hold the debris shield optic and spring washer in place with the lens 
cleaning tissue, and use snap ring pliers to insert the snap ring over the 
spring washer. Ensure that the snap ring is in place and secure before 
releasing the snap ring pliers.

Figure 17: Change the Debris Shield Optic

Содержание PULSE 100H













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды