Working at one side of the car a time, begin at the vehicle’s factory headlamp harness. Take
the headlamp ‘‘Plug
‐
n
-
play’’ connector from the LED headlight kit, and plug it into the factory
connector.
Take the kit’s ‘‘LED
‐
Canbus’’ wiring connector and plug its male end into the female end of the
headlamp plug
‐
n
‐
play connector.
NOTE: During Steps C. and D. below, take care to ensure that the headlamp does not drop.
Plug the female end of the ‘‘LED
‐
Canbus’’ wiring connector into the plug on the headlamp
assembly.
A
B
STEP 3: Making the headlamp electrical connections
C
13
Switchback Halo Wiring
H4 Bulb (3-Prong) Connector
H13 Bulb Connector
