STEP 1: Removal of factory (existing) headlamps
A
B
Circled are 3 of the clips to be taken out when removing the Jeep grille
Use philips and/or flat blade screwdrivers to remote clips (clip design may be differ on your vehicle)
The parking light assembly has already been removed from its location in the grille (circled)
The Jeep headlamp removal requires that the grille be removed first.
3
To remove the grille: open the hood; along the top of the grille where it meets the shroud,
remove all the plastic clips.
Gently pull the top of the grille outward, away from the car. Reach down and release the parking
lamp bulbs and holders, by turning them a quarter-turn. Keep them attached to the wire
harness, and place them where they will not be damaged. (They can be left to hang in the
opening between the bumper and the body of the Jeep).
