E
F
G
H
I
J
14
Carefully route all wiring through the headlamp bezel opening. Take your time and do not force
the wiring, there is ample room for all the wires. Use cable ties to neatly secure all wiring. Install
the LED headlamp in place by reatiaching the bezel ring.
Repeat Steps A
‐
D above for the other side.
Test all lights: low beam, high beam, DRL, turn signals.
If you used
Method B
in Step 2, go back and make final crimp of wiring at ‘‘Add
‐
a
‐
fuse’’ plug.
Reinstall any panels which were removed during wiring installation.
Reinstall turn signal bulbs into grille.
Reinstall grille onto vehicle.
D
Check out more light options on our website.
