LumaSense technologies MIKRON MCL640, Руководство пользователя

Страница: 5 / 39

MCL640 Manual General Information
∂
5
1 General Information
1.1 Information about the user manual
Congratulations on choosing the high quality and highly efficient LumaSense MCL640 Thermal
Imager.
This manual provides important information about the instrument and can be used as a work of
reference for installing, operating, and maintaining your MCL640 thermal imager. It is
important that you carefully read the information contained in this manual and follow all safety
procedures before you install or operate the instrument.
To avoid handling errors, keep this manual in a location where it will be readily accessible.
1.1.1 Legend
Note:
The note symbol indicates tips and useful information in this manual. All notes
should be read to effectively operate the instrument.
Warnings and Cautions: The general warnings and cautions symbol signifies the
potential for bodily harm or damage to equipment.
1.2 Operator Training
To best understand and utilize the measurements and images derived from the operation of this
instrument, the operator should understand the basics of heat transfer and infrared radiation
theory. Notes on these basics can be found in Chapter 4 of this manual. Qualified personnel
should provide education and training in these subjects.
Caution: The MCL640 instrument is an enclosed unit with no user serviceable parts. Do
not attempt to open the instrument housing as this will void the LumaSense warranty.
Please refer to the warranty statement found in Section 1.4 of this manual.
1.2.1 Safety
This manual provides important information on safely installing and operating the
MCL640 thermal imager. Several sections of this manual provide safety warnings to avert
danger. These safety warnings are specified with a warning symbol. You must read and
understand the contents of this manual before operating the instrument even if you have used
similar instruments or have already been trained by the manufacturer.
It is also important to pay attention to all labels and markings on the instrument and to keep
the labels and markings in a permanent readable condition.
Warning:
The thermal imager is only to be used as described in this manual. It is
recommended that you only use accessories provided by the manufacturer.