LumaSense technologies MIKRON MCL640, Руководство пользователя

Страница: 13 / 39

MCL640 Manual Controls and Installation
∂
13
3 Controls and Installation
The MCL640 infrared camera is configured to operate under certain conditions according to
user-defined specifications. As such, the camera is assembled, calibrated, and tested at the
LumaSense Factory and is delivered with the necessary components to create a fully operational
system.
3.1 Making the Connections
In order for the MCL640 system to operate correctly, the supplied hardware must be properly
attached to the computer and power supplied to the various parts of the system.
3.1.1 Connecting Power
Connect power to the thermal imager by following these steps:
1. Insert the power cable into the DC Power Input terminal.
2. Tighten the nut on the connector.
3.1.2 Connecting the Ethernet Cable
Typically, the system is set up by either connecting the camera to a network device (switch) or by
connecting the camera directly to a dedicated computer using an Ethernet cable.
1. Connect one end of the Ethernet (RJ45) cable to the host side Ethernet port on the
camera.
2. Connect the other end to the switch or computer.
Note: Use the Visible Camera Input Ethernet Interface when a visible camera is present.
Visible Camera Input
Ethernet Inteface
Host Side Gigabit
Ethernet Interface
DC Power Input