A.4. SETTINGS
67
the Bluetooth® module if there is no connection. The table below shows valid settings.
Setting
Description
0
Disabled
1-9
Inactivity minutes before auto off
Table A.2: AuxCom Auto Off Time
A.4.3 AuxCom Setting - Pwr Mode
This setting determines whether or not the AuxCom module is turned on when the instru-
ment is powered on. In addition to power savings, this setting is also intended for use when
a user has a need for “radio silence” (no RF broadcasts). This setting does not override the
hot key function. Again, the primary use for this parameter is while using Bluetooth®. The
table below shows valid settings.
Description
From Hotkey
At Boot
Table A.3: AuxCom Power on at Boot-up
A.4.4 AuxCom Setting - Write Protect
This setting is an additional security measure that prevents commands that would mod-
ify parameters from being executed over the AuxCom port. While using the instrument
equipped with a wireless radio, such as the Bluetooth® module, there is the potential for
the instrument becoming mis-configured, inadvertently or intentionally, from a remote lo-
cation. This setting is meant to ensure that cannot happen. The table below shows valid
settings.
Setting
Description
0
AuxCom Write Protect Disabled
1
AuxCom Write Protect Enabled
Table A.4: AuxCom Write Protect
,
If write protect is enabled, it can only be disabled by physically connecting it to
the instrument through the USB port.
A.4.5 AuxCom Setting - Encryption
This setting controls whether or not encryption is enabled on the AuxCom port. While us-
ing the instrument equipped with a wireless radio, such as the Bluetooth® module, there
is the potential for external eavesdropping or attack from a third party. By utilizing an in-
dustry standard encryption, this becomes much more difficult. The table below shows valid
settings.
ð
This setting only applies to SLURM mode.
December 2021
