Lucent Technologies OneVision DEFINITY G3 Fault Management, Руководство по установке и интеграции

Страница: 33 / 65

Adding DEFINITY G3 Proxy Agent Nodes
Issue 1 August 1996 21
10. Click
OK
, located at the bottom of the window.
Result: The Add Object Pallet window redisplays.
11. Repeat steps 3 through 9 for each additional Proxy Agent.
12. On the Add Object Pallet window, click
OK
.
Result: The Add Object Pallet window closes and the network map
redisplays with the newly added Proxy Agent icon.
Configuring a Proxy Agent Icon
A G3 Proxy Agent cannot communicate with Fault Management until it is
configured appropriately. To create the appropriate configuration,
complete the following steps. Start on the network map that displays after
you finished the preceding procedure.
1. From the menu bar, select
Options
, then select
SNMP
Configuration
.
Result: The SNMP Configuration window opens. Existing nodes are
listed at the top of the window.
2. Ensure that the
Use Proxy to access Target
button is turned off.