Lucent Technologies OneVision DEFINITY G3 Fault Management, Руководство по установке и интеграции

Страница: 22 / 65

Installation
10 Issue 1 August 1996
Installation Procedures
The Fault Management installation is fully automated (however, after the
installation is complete, you will need to make some basic changes to your
operating environment). Once you execute the command to install the Fault
Management application and all related software, the system completes
the installation without any need for intervention on your part.
Use the following steps to install Fault Management:
1. Insert the tape into the tape drive.
2. Log into the operating system as root.
3. Change directory to the root directory “/”.
4. Enter the following command:
tar xvf <tape device name>
5. Change to the following directory:
/usr/OV/OneVison/bin
6. Enter the following command:
./dg3fm_configure
The installation procedure completes the following:
■
Registers the application name with the NMS
■
Creates the necessary directory structure and copies all the
necessary files, include the bitmap, MIB, default database,
script, and application files
■
Installs the Fault Management application
■
Incorporates the new fields
■
Compiles the new bitmaps
■
Incorporates the DEFINITY G3 MIB into the existing MIB
■
Installs the
Dyna
Text online documentation