manualshive.com logo in svg

Lucent Technologies CBX 3500, Руководство по настройке

Спецификации устройства Lucent Technologies CBX 3500, доступный для бесплатного скачивания руководство пользователя на нашем сайте. Получите полную информацию о продукте, его функциях и настройках, скачав руководство прямо сейчас. Посетите {вебсайт} для загрузки.

Поделиться
Скачать
background image

Beta Draft Confidential

12-2

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring ATM Traffic Descriptors
Overview

Overview

Configuring a logical port associates ATM TDs with the logical port control channels. 
Depending on the type of logical port, these control channels include ILMI, UNI 
signaling, PNNI routing, trunk protocol, and management traffic control channels. To 
simplify the provisioning process, you do not have to explicitly select the ATM TD 
needed for the applicable control channel. A default value is always provided. 

Table 12-5

 (on 

page 12-13

) through 

Table 12-7

 (on 

page 12-15

) describe these default 

values in more detail. 

In most cases, you do not need to change the control channel default TDs. However, if 
you wish to have a particular control channel use a different QoS class or a different 
peak cell rate (PCR), sustainable cell rate (SCR), or maximum burst size (MBS), you 
have the ability to do so. For example, the default trunk signaling and management 
control channels that are used on trunks between Lucent switches are assigned to use 
the constant bit rate (CBR) QoS class and 5% of the configured logical port bandwidth 
(2.5% for each of the two channels). If necessary, you can change the QoS class of the 
trunk signaling channel; you can also change the amount of bandwidth associated with 
it.

If you plan to change the default values for logical port control channels, follow these 
guidelines:

•

For control channels between two Lucent switches (which encompasses the trunk 
signaling control channel and the node-to-node management traffic control 
channel), the TD values (PCR/SCR/MBS) are only used to calculate the amount 
of bandwidth reserved by the Connection Admission Control (CAC) for this type 
of traffic. The TD values do not affect traffic shaping on these channels nor do 
they affect the channel policing (these channels are never policed). You can 
change the default amount of bandwidth reserved for these control channels if you 
find the amount unacceptable.

•

The default amount of control channel bandwidth reserved on OC-3c/STM1 and 
OC-12c/STM4 trunks has changed. Previously, trunk control channel traffic was 
reserved at 5% of the logical port bandwidth (regardless of the media type). In 
some network scenarios for OC-3c/STM1 and OC-12c/STM4 trunks, this value 
was excessive; see 

Table 12-7 on page 12-15

 for new default reserved bandwidth 

values.

•

For control channels between a Lucent switch and another vendor device 
(including the ILMI, UNI signaling, and PNNI routing control channels), the TD 
values calculate both the amount of bandwidth reserved by CAC and the rate at 
which the control channels are policed. 

Control channels are not policed by default. You enable the usage parameter 
control (UPC)/network parameter control (NPC) for the particular logical port, 
and the control channel will be policed at the TD rate. Similar to the trunk control 
channels, the TD values associated with the ILMI, UNI signaling, and PNNI 
routing control channels do not affect the traffic shaping rate.

Содержание CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CBX 3500

CAME BPT XTS 7IP WH WIFI Installation And Configuration Manual preview
XTS 7IP WH WIFI
Бренд: CAME BPT Страницы: 24
Toa VS-900MS Specifications preview
VS-900MS
Бренд: Toa Страницы: 1
Dannmar D4-9 Installation And Operation Manual preview
D4-9
Бренд: Dannmar Страницы: 85
Contec IPC-CDD-02 User Manual preview
IPC-CDD-02
Бренд: Contec Страницы: 15
Contec CONPROSYS CPS-MC341-DS1-111 Reference Manual preview
CONPROSYS CPS-MC341-DS1-111
Бренд: Contec Страницы: 71
Pro-Ject Audio Systems Box Design BT Box S2 Instructions For Use Manual preview
Box Design BT Box S2
Бренд: Pro-Ject Audio Systems Страницы: 6
Prowise iPro Tilt Lift User Manual preview
iPro Tilt Lift
Бренд: Prowise Страницы: 15
Toa N-8050SB Specifications preview
N-8050SB
Бренд: Toa Страницы: 1
Waveshare Compute Module IO Board Plus User Manual preview
Compute Module IO Board Plus
Бренд: Waveshare Страницы: 17
WAGO 750-626 Manual preview
750-626
Бренд: WAGO Страницы: 12
Autopot SmartPot 8 XL Set-Up Manuallines preview
SmartPot 8 XL
Бренд: Autopot Страницы: 2
Gage CompuGen 1100 Hardware Manual And Driver Installation Manual preview
CompuGen 1100
Бренд: Gage Страницы: 36
AXEM Technology Atid AT188 User Manual preview
Atid AT188
Бренд: AXEM Technology Страницы: 31
Feig Electronic 5117.000.00 Installation Manual preview
5117.000.00
Бренд: Feig Electronic Страницы: 35
WPG MRTARC811LDC Instructions Manual preview
MRTARC811LDC
Бренд: WPG Страницы: 46
ALLEN & HEATH dLive CDM32 Getting Started User Manual preview
dLive CDM32
Бренд: ALLEN & HEATH Страницы: 14
Daewoo AXL-125 Service Manual preview
AXL-125
Бренд: Daewoo Страницы: 22
Burmester 151 Musiccenter Short Operating Instructions preview
151 Musiccenter
Бренд: Burmester Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды