manualshive.com logo in svg

Lucent Technologies CBX 3500, Руководство по настройке

Спецификации устройства Lucent Technologies CBX 3500, доступный для бесплатного скачивания руководство пользователя на нашем сайте. Получите полную информацию о продукте, его функциях и настройках, скачав руководство прямо сейчас. Посетите {вебсайт} для загрузки.

Поделиться
Скачать
background image

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

v

Beta Draft Confidential

7. Proprietary Rights Indemnification.

 Lucent shall at its expense defend you 

against and, subject to the limitations set forth elsewhere herein, pay all costs and 
damages made in settlement or awarded against you resulting from a claim that the 
Program as supplied by Lucent infringes a United States copyright or a United States 
patent, or misappropriates a United States trade secret, provided that you: (a) provide 
prompt written notice of any such claim, (b) allow Lucent to direct the defense and 
settlement of the claim, and (c) provide Lucent with the authority, information, and 
assistance that Lucent deems reasonably necessary for the defense and settlement of 
the claim. You shall not consent to any judgment or decree or do any other act in 
compromise of any such claim without first obtaining Lucent’s written consent. In any 
action based on such a claim, Lucent may, at its sole option, either: (1) obtain for you 
the right to continue using the Program, (2) replace or modify the Program to avoid 
the claim, or (3) if neither (1) nor (2) can reasonably be effected by Lucent, terminate 
the license granted hereunder and give you a prorata refund of the license fee paid for 
such Program, calculated on the basis of straight-line depreciation over a five-year 
useful life. Notwithstanding the preceding sentence, Lucent will have no liability for 
any infringement or misappropriation claim of any kind if such claim is based on: (i) 
the use of other than the current unaltered release of the Program and Lucent has 
provided or offers to provide such release to you for its then current license fee, or (ii) 
use or combination of the Program with programs or data not supplied or approved by 
Lucent to the extent such use or combination caused the claim.

8. Export Control. 

You agree not to export or disclose to anyone except a United 

States national any portion of the Program supplied by Lucent without first obtaining 
the required permits or licenses to do so from the US Office of Export Administration, 
and any other appropriate government agency.

9. Governing Law. 

This License Agreement shall be construed and governed in 

accordance with the laws and under the jurisdiction of the Commonwealth of 
Massachusetts, USA. Any dispute arising out of this Agreement shall be referred to an 
arbitration proceeding in Boston, Massachusetts, USA by the American Arbitration 
Association.

10. Miscellaneous.

 If any action is brought by either party to this License 

Agreement against the other party regarding the subject matter hereof, the prevailing 
party shall be entitled to recover, in addition to any other relief granted, reasonable 
attorneys’ fees and expenses of arbitration. Should any term of this License 
Agreement be declared void or unenforceable by any court of competent jurisdiction, 
such declaration shall have no effect on the remaining terms hereof. The failure of 
either party to enforce any rights granted hereunder or to take action against the other 
party in the event of any breach hereunder shall not be deemed a waiver by that party 
as to subsequent enforcement of rights or subsequent actions in the event of future 
breaches.

Содержание CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CBX 3500

U-Line H-3934 Manual preview
H-3934
Бренд: U-Line Страницы: 7
National Instruments NI-9244 Getting Started preview
NI-9244
Бренд: National Instruments Страницы: 15
National Instruments NI-9232 Getting Started Manual preview
NI-9232
Бренд: National Instruments Страницы: 20
National Instruments NI-9238 Getting Started Manual preview
NI-9238
Бренд: National Instruments Страницы: 22
National Instruments NI PXI-665 Series Calibration Procedure preview
NI PXI-665 Series
Бренд: National Instruments Страницы: 14
National Instruments NI USB-6008 User Manual And Specifications preview
NI USB-6008
Бренд: National Instruments Страницы: 30
National Instruments FD-11634 Quick Start Manual preview
FD-11634
Бренд: National Instruments Страницы: 10
National Instruments 9225 Operating Instructions And Specifications preview
9225
Бренд: National Instruments Страницы: 34
Yamaha DVR-S60 Service Manual preview
DVR-S60
Бренд: Yamaha Страницы: 108
ViziT VIZIT-M441MG Operating Instruction preview
VIZIT-M441MG
Бренд: ViziT Страницы: 11
M-system R8-YS2 Instruction Manual preview
R8-YS2
Бренд: M-system Страницы: 4
JBL HTPS-400 Owner'S Manual preview
HTPS-400
Бренд: JBL Страницы: 8
TCS IVX9001-0140 Product Information preview
IVX9001-0140
Бренд: TCS Страницы: 30
NANHUA DT001 Manual preview
DT001
Бренд: NANHUA Страницы: 6
jablotron JB-110N User Manual preview
JB-110N
Бренд: jablotron Страницы: 3
Mortuary Lift ULTIMATE 1000 Installation Suggestions preview
ULTIMATE 1000
Бренд: Mortuary Lift Страницы: 6
DAPAudio 1U fan unit Manual preview
1U fan unit
Бренд: DAPAudio Страницы: 12
Datavideo ITC300HP2K Instruction Manual preview
ITC300HP2K
Бренд: Datavideo Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды