manualshive.com logo in svg

Lucent Technologies CBX 3500, Руководство по настройке

Спецификации устройства Lucent Technologies CBX 3500, доступный для бесплатного скачивания руководство пользователя на нашем сайте. Получите полную информацию о продукте, его функциях и настройках, скачав руководство прямо сейчас. Посетите {вебсайт} для загрузки.

Поделиться
Скачать
background image

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

iii

Beta Draft Confidential

LUCENT TECHNOLOGIES END-USER LICENSE AGREEMENT

LUCENT TECHNOLOGIES IS WILLING TO LICENSE THE ENCLOSED SOFTWARE 
AND ACCOMPANYING USER DOCUMENTATION (COLLECTIVELY, THE 
“PROGRAM”) TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF 
THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT. PLEASE READ 
THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY 
BEFORE OPENING THE PACKAGE(S) OR USING THE LUCENT SWITCH(ES) 
CONTAINING THE SOFTWARE, AND BEFORE USING THE ACCOMPANYING USER 
DOCUMENTATION. OPENING THE PACKAGE(S) OR USING THE LUCENT 
SWITCH(ES) CONTAINING THE PROGRAM WILL INDICATE YOUR ACCEPTANCE 
OF THE TERMS OF THIS LICENSE AGREEMENT. IF YOU ARE NOT WILLING TO BE 
BOUND BY THE TERMS OF THIS LICENSE AGREEMENT, LUCENT IS UNWILLING 
TO LICENSE THE PROGRAM TO YOU, IN WHICH EVENT YOU SHOULD RETURN 
THE PROGRAM WITHIN TEN (10) DAYS FROM SHIPMENT TO THE PLACE FROM 
WHICH IT WAS ACQUIRED, AND YOUR LICENSE FEE WILL BE REFUNDED. THIS 
LICENSE AGREEMENT REPRESENTS THE ENTIRE AGREEMENT CONCERNING 
THE PROGRAM BETWEEN YOU AND LUCENT, AND IT SUPERSEDES ANY PRIOR 
PROPOSAL, REPRESENTATION OR UNDERSTANDING BETWEEN THE PARTIES.

1. License Grant. 

Lucent hereby grants to you, and you accept, a non-exclusive, 

non-transferable license to use the computer software, including all patches, error 
corrections, updates and revisions thereto in machine-readable, object code form only 
(the “Software”), and the accompanying User Documentation, only as authorized in 
this License Agreement. The Software may be used only on a single computer owned, 
leased, or otherwise controlled by you; or in the event of inoperability of that 
computer, on a backup computer selected by you. You agree that you will not pledge, 
lease, rent, or share your rights under this License Agreement, and that you will not, 
without Lucent’s prior written consent, assign or transfer your rights hereunder. You 
agree that you may not modify, reverse assemble, reverse compile, or otherwise 
translate the Software or permit a third party to do so. You may make one copy of the 
Software and User Documentation for backup purposes. Any such copies of the 
Software or the User Documentation shall include Lucent’s copyright and other 
proprietary notices. Except as authorized under this paragraph, no copies of the 
Program or any portions thereof may be made by you or any person under your 
authority or control.

2. Lucent’s Rights. 

You agree that the Software and the User Documentation are 

proprietary, confidential products of Lucent or Lucent's licensor protected under US 
copyright law and you will use your best efforts to maintain their confidentiality. You 
further acknowledge and agree that all right, title and interest in and to the Program, 
including associated intellectual property rights, are and shall remain with Lucent or 
Lucent's licensor. This License Agreement does not convey to you an interest in or to 
the Program, but only a limited right of use revocable in accordance with the terms of 
this License Agreement.

Содержание CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CBX 3500

Underhill Tracker Assembly Instructions And Operation Manual preview
Tracker
Бренд: Underhill Страницы: 15
E-Mu 1616 PCI Manual preview
1616 PCI
Бренд: E-Mu Страницы: 72
E-Mu 1212M Tutorials Manual preview
1212M
Бренд: E-Mu Страницы: 44
MAJORITY HNT-CDAB-BLK User Manual preview
HNT-CDAB-BLK
Бренд: MAJORITY Страницы: 32
National Instruments myRIO-1950 User Manual preview
myRIO-1950
Бренд: National Instruments Страницы: 20
National Instruments 9361 Calibration Procedure preview
9361
Бренд: National Instruments Страницы: 6
National Instruments SCXI Quick Start Manual preview
SCXI
Бренд: National Instruments Страницы: 30
National Instruments 9232 Calibration Procedure preview
9232
Бренд: National Instruments Страницы: 7
National Instruments 6527 Programmer'S Manual preview
6527
Бренд: National Instruments Страницы: 37
National Instruments BNC-2090A Quick Start Manual preview
BNC-2090A
Бренд: National Instruments Страницы: 8
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Бренд: WAREMA Страницы: 112
WAGO WAGO-I/O-SYSTEM 750 XTR Series Manual preview
WAGO-I/O-SYSTEM 750 XTR Series
Бренд: WAGO Страницы: 272
WAGO I/O-SYSTEM 750 Manual preview
I/O-SYSTEM 750
Бренд: WAGO Страницы: 450
Radionics D9000 Series Installation And Troubleshooting Quick Reference preview
D9000 Series
Бренд: Radionics Страницы: 14
CAME ZCX10 Manual preview
ZCX10
Бренд: CAME Страницы: 28
Vimar Elvox 88T1 Installer'S Manual preview
Elvox 88T1
Бренд: Vimar Страницы: 16
DIG LEIT X Series Instruction Manual preview
LEIT X Series
Бренд: DIG Страницы: 28
Fancom LUMINA 41 Instruction Manual preview
LUMINA 41
Бренд: Fancom Страницы: 51

Бренды по названию

Популярные бренды

Загрузить еще бренды