2 - 36
Cajun P880 Routing Switch Installation Guide
2
7.
In the
Mask
field, enter the
network mask IP address (
for
example, 255.255.255.0).
8.
Click
APPLY
to save your changes, or
CANCEL
to restore
previous settings.
Configuring a Static
Route for the PPP
Console
To configure a PPP Console static route:
1.
Configure your console serial port as a PPP Console. Refer to
"Connecting a Modem", earlier in this chapter.
2.
From the
IP Configuration
section of the Web Agent window,
click
Static Routes
. The IP Static Routes dialog box opens.
3.
Click
CREATE
. The Add IP Static Routes dialog box opens. This
allows you to define a static route for the PPP console.
4.
In the
Network Address
field, enter the
IP address
to be
associated with the PPP console port.
5.
In the
Mask
field, enter the
network mask IP address
.
6.
In the
Next-Hop Address
field, enter the
IP address
of the
gateway associated with this static route.
7.
Click
APPLY
to save your changes, or
CANCEL
to restore
previous settings.
Hardware Requirements for Routing
To configure your switch as an IP/IPX or AppleTalk router, you must
first configure your Cajun switch with the following hardware:
■
P880 supervisor module (mandatory)
■
Layer 3 media modules (optional) including:
—
2-Port Gigabit Ethernet module
—
10-Port 100-BASE-F module
—
12-Port 10/100-BASE-T module
