Cajun P880 Routing Switch Installation Guide
2 - 27
To enable Fast Start for ports on a module associated with a selected
bridge:
1.
In the
System Configuration
section of the Web Agent
window, click
Modules & Ports
. The Module Information
dialog box opens.
2.
In the
Switch Ports
column, click on the
switch port number
listed for the selected module. The Switch Ports dialog box
opens.
3.
To set Fast Start mode on individual ports, in the
Name
column,
click
the port name for the selected module.
The Switch
Port Configuration dialog box opens.
Or
To set Fast Start mode on all ports in a module, click
All Module
Switch Port Configuration
. The Switch Port Configuration on
All Ports dialog box opens.
4.
From the
Fast Start
pull-down menu, select
Enable
to enable
Fast Start mode on the selected module ports.
5.
Click
APPLY
to save your changes, or
CANCEL
to clear your
selection.
Using the All Ports Configuration Dialog Box
The All Ports Configuration dialog box allows you to apply the same
parameter settings to all switch ports in a module using a single
command.
To set all switch ports in a module using a single command:
1.
In the
System Configuration
section of the Web Agent
window, select
Modules & Ports
. The Module Information
dialog box opens.
2.
In the
Ports
column, click the
number
of ports listed for the
module you want to configure (for example,
10
for 100BASE-
FX). The Physical Port Configuration dialog box opens.
3.
Click
All Module Ports Configuration
at the bottom of the
dialog box. The All Ports Configuration dialog box opens.
4.
Select the port on which you want your changes to occur.
