0940-1_M+B-PutentraenkeGB
LUBING Floor Watering System
- 29 -
Proprietary statement
Dr. Vahldiek, Processing-Service
At designated application of EVC 12 (maximum resolution of 10% in water T
max
=
50°C) the following plastics are consistent:
-
plexiglass
- polyvinyl chloride (PVC)
- polyethylene (PE)
- polypropylene (PP)
- fluor caoutchouk (viton A and B)
The product datas
Composition
Chemical characterisation:
Preperation with powdery acids, dispersing agents and organic inhibitores.
CAS-no.: 5329-14-6 77-92-9
EINECS-no: 226-218-8 201-069-1
Identification according to the EG principle:
Sulf amino acid citric acid
Concentration (%) >20 %
>20 %
Instructions
Instructions by the Employer´s Liability & Insurance Association: please adhere to the leaflet M004
„Acid Materials“.
The unused product has to apply to a special handling according to the magisterial instructions.
Identification according to dangerous goods
(valid for the concentrate)
Xi irritating
R36/38: Irritates eyes and skin
S26:
Wash out the eyes immediately after getting in touch with them and consult a doctor
S28:
Wash the skin immediately with plenty of water after getting in touch with it
General cleaning of the drinking systems via Medicator:
The material requirements for the general cleaning (cleaning and desinfection)
depend on the following factors:
1. the water quantity in the drinking system,
(each 2 metres drinking line approx. 1 litre)
2. the supply pipe (diameter and lenght)
3. a reserve of 30% for the leakage at the nipples. (sum from 1
st
and 2
nd
*1.3)
First the parent solution gets prepared.
5% of the acquired water quantity has to be filled into a tank. This water gets
prepared with EVC 12 as parent solution, i. e. the total quantity of EVC12 gets
agitated into the solution.
