9.9 EC-fans: Replacing fan package
WARNING:
Cutting and crushing hazard when removing the spare parts from the packaging.
Wear safety shoes, safety helmet and cut-resistant safety gloves.
Do not perform any repairs on the fan package. If the fan or its package is broken, return the fan to Fincoil LU-
VE Oy for repair or replacement.
To replace the fan package
1.
Switch off the device through the control input.
2.
Switch off the current from the unit.
Use lockout and tagout.
3.
Wait for five minutes before opening the device.
4.
Disconnect all cables.
Disconnect the earth wire connection last.
5.
Open the motor bracket bolts and lift the fan unit up from the collar.
6.
Mount the new unit and connect the cables.
Use old cable glands.
7.
When routing the cable, ensure that the screwed cable glands are arranged at the bottom.
Always route the cables downwards.
8.
Tighten the cable to the motor bracket with UV-protected cable ties.
9.
Check the rotation and the general functioning of the fan on a test run.
©
Alfa LU-VE, Rev-04
79
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.