LTG HDF-600, Инструкция по эксплуатации, установке и обслуживанию

Страница: 30 / 32

E
LTG Incorporated · PO Box 2889 · Spartanburg, S.C. 29304, USA Chilled beams HDF-us-OM (01/17)
Phone 864 599-6340, Fax -6344 · info@LTG-INC.net · www.LTG-INC.net
Former editions are invalid · Subject to technical modifications
page 30 of 30
Installation, operating and maintenance instructions
Active chilled beams HDF-600, ceiling installation
7.8 Maintenance intervals of the individual components
Component Activity To perform
months as required
Unit, in general Check for pollution, damage, corrosion,
correct positioning and fixation 12
Heat exchanger Check for pollution, damage and corrosion 6
Clean to maintain function 6 x
Check water connections 12
Check proper function of entry and return 12
Vent x
Check for hygienic condition 6
* Shorten replacement intervals if outside or recirculating air are extremely dust loaded.
VDI 6022 sanitation requirements must be observed.
8. Spare Parts
The following spare parts are available and may be or ­
dered from LTG Aktiengesellschaft stating unit type and
description.
Qty. Ident-No. Description
1 1047555 Heat exchanger
1 1051037 Clips
1 1042181 Steel rope
1 1051221 Diffuser grille
1 1051226 Frame
For heat exchangers please state connection (1/2”,
smooth copper tube)
1.Dient zur Identifizierung der letzten Seite
9. Decommissioning, disposal
When the unit is taken out of service, is no longer used and
is disposed of as waste, the following must be complied
with:
- all steel parts are waste for recycling
- all plastic parts are waste for recycling
- all secondary substances and lubricants must be dis
­
posed of in accordance with the provisions of the EWC
(European Waste Catalogue) classification.