Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53300131-01
Printed in U.S.A.
Form 30RAP-12SI
Pg 1
3-14
Replaces: 30RAP-11SI
Installation Instructions
CONTENTS
Page
SAFETY CONSIDERATIONS
. . . . . . . . . . . . . . . . . . . . .1,2
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-57
Storage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 1 — Place and Rig the Unit
. . . . . . . . . . . . . . . . . . 2
• PLACING UNIT
• RIGGING
• MOUNTING UNIT
Step 2 — Check Compressor Mounting
. . . . . . . . . 11
Step 3 — Cooler Fluid and Drain Piping
Connections
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• ALL UNITS
• UNITS WITH FACTORY-INSTALLED
HYDRONIC PACKAGES
• AIR SEPARATION
Step 4 — Fill the Chilled Water Loop
. . . . . . . . . . . . 25
• WATER SYSTEM CLEANING
• FILLING THE SYSTEM
• PREPARATION FOR YEAR-ROUND OPERATION
• FREEZE PROTECTION
• PREPARATION FOR WINTER SHUTDOWN
Step 5 — Make Electrical Connections
. . . . . . . . . . 35
• POWER SUPPLY
• POWER WIRING
• FIELD CONNECTIONS
Step 6 — Install Accessories
. . . . . . . . . . . . . . . . . . . . 53
• ELECTRICAL
Step 7 — Check Refrigerant Circuit
. . . . . . . . . . . . . 53
• LEAK TESTING
• DEHYDRATION
• REFRIGERANT CHARGE
BACnet Communication Option Wiring
. . . . . . . . . . 55
APPENDIX A (Pressure Drop Curves)
. . . . . . . . 58-70
SAFETY CONSIDERATIONS
Installing, starting up, and servicing air-conditioning equip-
ment can be hazardous due to system pressures, electrical
components, and equipment location (roofs, elevated struc-
tures, etc.).
Only trained, qualified installers and service mechanics
should install, start up, and service this equipment (Fig. 1).
Untrained personnel can perform basic maintenance func-
tions such as cleaning coils. All other operations should be
performed by trained service personnel.
When working on the equipment, observe precautions in the
literature and on tags, stickers, and labels attached to the
equipment.
• Follow all safety codes.
• Wear safety glasses and work gloves.
• Keep quenching cloth and fire extinguisher nearby when
brazing.
• Use care in handling, rigging, and setting bulky
equipment.
.
WARNING
Electrical shock can cause personal injury and death. Shut
off all power to this equipment during installation. There
may be more than one disconnect switch. Tag all discon-
nect locations to alert others not to restore power until work
is completed.
WARNING
DO NOT USE TORCH to remove any component. System
contains oil and refrigerant under pressure.
To remove a component, wear protective gloves and gog-
gles and proceed as follows:
a. Shut off electrical power to unit.
b. Recover refrigerant to relieve all pressure from sys-
tem using both high-pressure and low pressure ports.
c. Traces of vapor should be displaced with nitrogen
and the work area should be well ventilated. Refrig-
erant in contact with an open flame produces toxic
gases.
d. Cut component connection tubing with tubing cutter
and remove component from unit. Use a pan to catch
any oil that may come out of the lines and as a gage
for how much oil to add to the system.
e. Carefully unsweat remaining tubing stubs when nec-
essary. Oil can ignite when exposed to torch flame.
Failure to follow these procedures may result in personal
injury or death.
Fig. 1 — Typical 30RAP Unit (018-030 Shown)
AquaSnap
®
30RAP010-150
Liquid Chillers
with Puron
®
Refrigerant (R-410A)
Содержание AQUASNAP 30RAP010-150
