LSC maXim LP Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 84

LSC maXim LP Скачать руководство пользователя страница 11

maXim

MP L(P) XL(P) XXL(P)

Operator Manual V3

LSC Lighting Systems (Aust) Pty. Ltd

Page

5

2 PRODUCT

DESCRIPTION

2.1 INTRODUCTION

The

maXim MP, L(P), XL(P) and XXL(P)

models are the larger desks in the extensive

maXim

family of

fader based lighting controllers. The letter P in the model name indicates that the PaTPaD moving light
controller has been fitted.
This manual describes the operation of the maXim including the PaTPaD. If your

maXim

is not fitted with

a PatPad, please disregard any references to it. As you will see, the PaTPaD provides a multitude of
features that are essential when operating moving fixtures. If you want to add these features, a PaTPaD
can be retrofitted to your maXim by your LSC dealer.

All models are very similar in operation and vary only in their size, layout, number of faders and
memories. At any point in this manual where the model affects the specification, the text will describe the

maXim

MP

followed by the

maXim

L, XL

and

XXL

in brackets.

For example; “The Yellow bank has faders for channels/fixtures 1 to 24 (36, 48, 60)”.

2.2 FEATURES

The

maXim

incorporates the following features;

•

Manual faders for all channels/fixtures with associated Flash buttons.

•

“Preset”, “Wide” and “Playback” modes of operation.

•

9 pages of non volatile memory.

•

Separate In (up) and Out (down) fade times (0 to 999 seconds).

•

Scene Fade Times can be derived from the Time Faders or from Memory.

•

Electronic labelling of all fixtures, scenes, chases, filters, presets, palettes, stacks and stack steps.

•

Fully proportional Softpatch.

•

Flash level control, with associated Add or Solo mode button.

•

Page freeze retains active output when pages or modes are changed.

•

User prompts appear on the display and active buttons flash to make operations simple.

•

Different languages are available.

•

Multi display SVGA colour video output.

•

Fully Isolated DMX512/1990 output signal.

•

Power supply is auto selecting, 90

−

260 volts, 47/63Hz.

maXim L(P)

Extensive

Editing

and

Control

functions.

Masters

for overall
control.

Simple

recording

and

copying

functions.

Theatrical style

Stack

with up to 500 steps

On Board

keyboard

for

naming of
memories etc.

Red bank has 3 Modes.

Preset

(duplicate channels).

Wide

(additional channels/ fixtures).

Playback

(for Scenes or Chases)

with 9 pages of memory.

Separate In and Out

Time

Masters

.

Blue

Playbacks

for

Scenes or

Chases with 9

pages of
memory.

PaTPaD.

Touch pad

for

control of moving
fixtures.

Yellow bank

channel / fixture

faders

with associated Flash

buttons.

Add or Solo

Flash modes
with level
control.

«
...
9
10
11
12
13
...
»

Содержание maXim LP





















































































Отзывы:

Нет отзывов