LOADER MOUNTING
CAUTION:
Never allow weight of tractor to be put on parking
leg when mounting loader.
▶ Carefully drive the tractor into the loader to a
position where the hydraulic hoses(Quick coupler)
can be connected to the control valve block.
▶ Stop the engine and move the control lever back
and forth, Left and right several times to reduce the
pressure in the hydraulic hoses. Connect the
hydraulic couplers match the color code rings.
▶ Start the engine and move the boom and bucket
to adjust the height of post.
Be sure to check the pin welded of post is slightly
higher than the hook on mounting frame.
▶ Move the tractor forward to put the post into the
mounting frame. Stop the tractor
When the hook is right over the pin.
Lower the mounting frame with moving the boom
and bucket until it hooked securely each other.
▶ Align the latch pin holes with moving the bucket
and boom.
Insert the latch pins.
Rubber hammer can be used to put the pin in if
needed.
▶ Remove pin and keeper holding the parking legs
and return to storage position. Make secure by using
pin and keeper.
Содержание LL3301
