3 - 14
Engine
warning
indicator
(DPF)
Temp.
indicator
(DPF)
Regen.
indicator
(DPF)
Inhibit.
indicator
(DPF)
regeneration
mode
The (DPF) status and work restriction
No regeneration
mode
-. The soot load in the (DPF) is below 60%.
-. Work is possible.
OFF
OFF
OFF
OFF
Auto-regeneration
preparation mode
-. The soot load in the DPF is 60~80%.
-. (DPF) will regenerate soon automatically after engine starting.
-. Work is possible.
OFF
OFF
ON
OFF
Auto-regeneration
preparation mode
-. The soot load n the DPF is 80~100%.
-. (DPF) will regenerate soon automatically after engine starting.
-. Work is possible.
OFF
OFF
Blink(2sec)
OFF
Power limit
preparation mode
-. The soot load in the (DPF) is 100~140%.
-. (DPF) will regenerate soon automatically after engine starting.
-. It is possible to start work after auto regeneration, after all
indicator lights are “OFF” and engine speed has returned to
normal speed.
Blink(2sec)
OFF
Blink(1sec)
OFF
Auto-regeneration
operation mode
-. The soot load in the (DPF) is less than 80% and (DPF) is
regenerating automatically.
-. Work is possible.
OFF
ON
ON
OFF
Auto-regeneration
operation mode
-. The soot load in the (DPF) is 80~100% and (DPF) is
regenerating automatically.
-. Work is possible.
OFF
ON
Blink(2sec)
OFF
High Exhaust
temperature mode
-. The temperature at DPF outlet is being over
300
℃
(572
℉
) after auto regeneration.
-. The indicator will be turned off under 300
℃
(572
℉
).
-. Work is possible.
OFF
ON
OFF
OFF
Power limit
Operation mode
-. The soot load in the (DPF) is 100~140% and (DPF) is
regenerating automatically.
-. Engine power is de-rated 50% and engine speed is limited to
1,800rpm.
-. Have to STOP work.
-. It is possible to start work after auto regeneration, after all
indicator lights are “OFF” and engine speed has returned to
normal speed.
Blink(2sec)
ON
ON
OFF
Engine Shutdown
mode
-. The soot load in the (DPF) is over 140% and engine has
been shutdown.
-. Contact your authorized dealer immediately. If restarting the
engine, the engine can run for only thirty seconds to escape
an emergency.
Blink(1sec)
OFF
Blink(1sec)
OFF
(DPF) inhibited
Operation mode
-. Work is possible.
-. Press the (DPF) switch to auto regeneration after entering a
safe regeneration area.
OFF
OFF
OFF
ON
Engine shutdown
mode
-. Engine shut down with other problems.
-. Contact your authorized dealer for check.
Blink(1sec)
OFF
OFF
OFF
The combination of (DPF) indicator lights in instrument panel
3 - 15
Содержание XG3032
Страница 97: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track...
Страница 100: ...4 27 Attaching points for Front end loader z When attaching the front end loader refer to the drawings as below...
Страница 144: ...6 1 6 Dimension and Specification 4WD model Unit mm 1091 1374 1115 3401...