5 - 26
(1) Replacing Engine coolant
z
After cooling down the engine enough, open the
radiator cap slowly.
z
Set a clean container under radiator drainage
cock.
Warning
▶
When opening the radiator cap,
be careful of the escaping hot
water or steam.
▶
Cool down the coolant
sufficiently before opening.
Drainage cock
z
Loosen radiator drainage cock and drain engine
coolant completely.
z
Before adding new coolant, wash out the
radiator with clean water 2~3 times.
z
Apply the overflow tube and add new coolant up
to the filler neck. Fill up the expansion tank with
coolant between “LOW” and “HIGH” marks.
z
Capacity : refer to the section 5-3 or the last
page in this manual.
z
Add clean soft water as the coolant, not hard
water like well water. If not, the radiator shall be
corroded or rusted.
z
Change the coolant with anti-freeze solution in
cold weather.
z
Anti-freeze solution is filled up from the factory.
After first winter, replace the engine coolant to
remove foreign materials.
Radiator cap
5-12. Every 2-year check
Expansion tank
Содержание XG3032
Страница 97: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track...
Страница 100: ...4 27 Attaching points for Front end loader z When attaching the front end loader refer to the drawings as below...
Страница 144: ...6 1 6 Dimension and Specification 4WD model Unit mm 1091 1374 1115 3401...
