1 - 7
(2) Notices when starting Engine
z
Check each part with reference of “5. Lubrication
and Maintenance” in this manual. If necessary,
repair or replace it immediately.
Especially,
check if safety protection structures or covers
are attached originally and the bolts and nuts
are tightened well.
z
Before starting,
check again if there are other
workers or children around the tractor and
implements and keep a safe distance.
z
Start engine and operate the tractor
after sitting
on the driver’s seat
correctly with seat belt
fastened.
z
Place the shuttle lever, transmission gear lever in
NEUTRAL and especially check if parking brake
is applied.
z
Lower the implements on the ground.
z
Ensure that rear view mirrors and the other
mirrors (if fitted) are adjusted correctly, and check
the operation of the headlights and other lights
z
For driver’s safety, to prevent an unintentional
start, movement and operation, several and
various start-safety interlock devices may be
equipped on your tractor. And, these installation
may need to do correct operation and follow the
procedure strictly. Read carefully section 4-1,
“ Engine start and stop” in this manual before
trying to start engine.
z
Do not short across the starter motor terminals to
start engine. It may cause a sudden start and
serious injury or death.
z
Keep maintenance tools away from engine after
check and repair.
Warning
▶
Do not start the engine in a closed area. The poisonous exhaust gas can cause
fatal damage to the driver or persons around.
Starter motor
Содержание XG3032
Страница 97: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track...
Страница 100: ...4 27 Attaching points for Front end loader z When attaching the front end loader refer to the drawings as below...
Страница 144: ...6 1 6 Dimension and Specification 4WD model Unit mm 1091 1374 1115 3401...