4 - 9
1. Press clutch and brake pedals. Place all the
transmission gear levers in neutral and PTO
switch to OFF and release the clutch pedal.
3. Apply parking brake and release brake
pedals slowly.
2. Lower implements to the ground and turn
key switch to OFF position.
(4) Stopping tractor
Caution
▶
DO NOT depart from the tractor with the transmission gear placed in NEUTRAL
and the parking brake is not applied. The tractor may move down. Apply parking
brake at all times before leaving the tractor.
▶
Remove ignition key always after stopping engine.
Mechanical type
1. Release HST forward/reverse pedal slowly
and pull throttle lever backward to reduce the
engine speed and then place the range gear
shift lever in NEUTRAL and PTO switch to
OFF.
3. Apply parking brake and release brake
pedals slowly.
2. Lower implements to the ground and turn
key switch to OFF position..
HST Type
Clutch pedal
Throttle lever
Brake pedals
Key switch
Parking brake lever
Shuttle lever
PTO switch
HST reverse pedals
Brake pedals
Throttle lever
Parking brake lever
HST forward pedals
Key switch
Содержание XG3032
Страница 97: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track...
Страница 100: ...4 27 Attaching points for Front end loader z When attaching the front end loader refer to the drawings as below...
Страница 144: ...6 1 6 Dimension and Specification 4WD model Unit mm 1091 1374 1115 3401...
