(14) Driver’s seat (HST type)
At the lower end of the seat, there is a switch to
detect that operator is sitting in driver’s seat.
If the operator gets up from the seat while engine is
running, the engine will stop automatically for safety
in case of ;
- getting up from the seat for more than 2 seconds
with HST pedal NOT in neutral position.
- the HST pedal is in NEUTRAL and rear PTO is
engaged without applying the parking brake.
- the Middle PTO lever (option) is engaged.
Before leaving the driver’s seat, turn the PTO switch
to OFF and place the Middle PTO lever (option) on
Seat switch
(15) Seat adjustment
Before operating the tractor, adjust the position of
driver’s seat according to body size and length.
Seat F/R adjustment lever
1) After sitting on driver’s seat, lift the seat F/R
adjustment lever up to release the lock.
2) Move the driver’s seat forward or backward
according to driver’s body length.
3) Release the seat F/R adjustment lever and ensure
that seat is locked.
warning
▶
DO NOT arbitrarily remove the seat switch. If it is necessary to replace the seat the
seat switch has to be replaced together. If not, the engine does not start.
to OFF and place the Middle PTO lever (option) on
OFF position, and apply the parking brake.
Seat belt rest
Seat belt
3
3
3
3
- 15
warning
▶
DO NOT put your hand under the seat while sitting. It may cause a injury by seat
suspension.
▶
DO NOT adjust the seat position while driving.
that seat is locked.
Keep the released seat belt on the seat belt rest
after working.
To prevent weathering of driver’s seat, raise the
seat forward.
Seat F/R
adjustment lever
