(2) Notices when starting Engine
Check each part with reference of the section 5,
Lubrication and Maintenance
in this manual. If
Safety Structure :
For the safety of the driver, various protection structures are attached on the
tractor. If these structures are changed or detached by user arbitrarily, it may cause serious
accident. Such behaviors are prohibited strictly and void the warranty.
▶
Do not disassemble or drill the Bonnet (Hood), Fan cover, PTO cover, PTO shaft
cover, Safety frame (Roll Bar) or Cabin etc. or do not modify other structures by
welding arbitrarily. It may cause the loss of original function of the structures and
serious injury may occur, and may void warranty.
▶
If the protections or safety devices are broken, replace them immediately. If not, it
can cause a accident or serious injury.
Warning
Lubrication and Maintenance
in this manual. If
necessary, repair or replace it immediately.
Especially, check if safety protection
structures or covers are attached originally
and the bolts are tightened well.
Before starting,
check again if there are other
workers or children around the tractor and
implements and keep a safe distance.
Start engine and operate the tractor
after sitting
on the driver’s seat
correctly with seat belt
fastened.
Place the shuttle lever, transmission gear lever in
NEUTRAL and especially check if parking brake
is applied.
Lower the implements on the ground.
Ensure that rear view mirrors and the other
mirrors (if fitted) are adjusted correctly, and check
PTO switch
1
1
1
1
- 5
mirrors (if fitted) are adjusted correctly, and check
the operation of the headlights and other lights
Put PTO switch to OFF position. If the PTO switch
is NOT in OFF position, the engine can NOT be
started. (
See Fig.1-4
)
Depress the clutch pedal fully (if fitted). If not, the
start safety switch is not contacted enough and
the engine can NOT start.
Warning
▶
Do not start the engine in a closed area. The poisonous exhaust gas can cause fatal
injury to the driver or persons around.
Fig.1-4
ON : PUSH AND TURN
OFF : PUSH
