①
①
①
①
Position control
This mode sets the position of implements freely
by position control lever operation. Generally,
this mode is used for tiller, fertilizer distributor,
mower, rake etc. In this case, operate the lever
as follows.
1.Push position control lever forward and the
implement lets down by its own weight.
2.If the position control lever is on random position,
the implement stops at the height corresponding
to the lever position.
3.To keep the height of implement in a desired
range, restrict the lever to the lowest point with
Position control lever
Stopper A
range, restrict the lever to the lowest point with
stopper A.
Down speed
control knob
Fast
Slow & lock
②
②
②
②
Down speed control knob
Turn the knob to the clockwise to lower the
implement slowly and to the counter-clockwise
to rise speed faster. If turning clockwise, the
implement is fixed and even If lowering down the
position control lever, the implement does not let
down. Do not over tighten control knob could
cause damage to the control valve.
Tiller : Slow in down speed
Plough : Fast in down speed
When working in hard ground, slow down the
down speed to avoid the bounding of the
implements.
3
3
3
3
- 17
implements.
▶
When driving on the road, turn right the down speed control knob slightly to lock.
Do not over tighten control knob.
▶
When changing the blades of tiller or removing grass, stop the engine and turn the
down speed control knob to right slightly to lock. (The knob may turn about two
revolutions. Do not over tighten control knob.)
Warning
