CONNECTING THE LINESHARE 4.1
This section explains how to install the LineShare 4.1 in most phone configurations that appear in a home
or office. You can install the LineShare 4.1 into one of the following phone configurations:
• A single telephone line
• A telephone system
Installation procedures for each of these configurations are provided in the following sections.
To perform the installation procedures in the following sections, you may need the following equipment:
• Telephone cables to connect the LineShare 4.1 to your telephone (wall) jack.
• Extension cables – required if the connecting equipment is not located near the LineShare 4.1
• Additional telephone cables – typically supplied with equipment by the manufacturer. You need ad-
ditional telephone cables for as many pieces of equipment manufacturer does not provide the re-
quired cables, you can purchase them at a consumer electronic store.
Installation on a Single Telephone Line
The following diagram shows a complete installation for a single phone line connection. While the connec-
tions to the telephone (wall) jack may be different for other types of phone systems, the connections to the
LineShare 4.1 remain the same for all phone configurations.
1. Plug one end of a telephone line cord into the LINE-IN port on the LineShare 4.1. Plug the other
end of the modular line cord into the telephone (wall) jack.
2. Plug the small end of the AC power cord provided with the LineShare 4.1 into the power input port
labeled "12 VAC" on the LineShare 4.1. Plug the adapter into a standard AC outlet.
The green LED flashes rapidly for about 5 seconds when power is applied and then remains illu-
minated, indicating it is ON.
3. To connect an answering machine, plug one end of a telephone line cord into the ANS. M. port on
the LineShare 4.1.
4. To connect a phone, plug one end of a telephone line cord into the PHONE port on the LineShare
4.1.
5. To connect a fax machine, plug one end of a telephone line cord into the FAX port on the LineShare
4.1. Set the fax to answer on 1 ring.
6. To connect a telephone device such as a computer modem, plug one end of a telephone line cord
into the AUX port on the LineShare 4.1.
Long Range Systems
5
LineShare 4.1
