For remote access to the AUX port on the LineShare 4.1, instruct the caller to use the following dialing string in the
modem's software:
• Phone number,#22,#22,#22,#22 (for Automatic mode)
• Phone number,,,#22,#22,#22,#22 (for Semi-Automatic)
For long distance remote access to the FAX port of the LineShare 4.1, instruct the caller to use the following dialing
string in the modem's software:
• 1 + phone number,,,#22,#22,#22,#22(for Automatic mode)
• 1 + phone number,,,,,#22,#22,#22,#22 (for Semi-Automatic)
The calling modem picks up its phone line and dials the phone number. The comma (,) tells the modem to
wait about two (2) seconds and then repeatedly dial the access code.
In the Automatic mode the LineShare 4.1 will answer a call, detect the tones and transfer the call to the
FAX/MODEM port.
In the Semi-Automatic mode, you or your answering machine will answer the call, then the LineShare 4.1 will
detect the tones and transfer the call to the FAX port.
NOTE:
Not all modem comma (,) commands delay dialing for a 2 second interval. See your modem Op-
erator's Guide and adjust the number of commas you use accordingly
.
NOTE:
In the Semi-Automatic mode, the commas entered before the #11 are used to add delay to allow
for your answering machine's 2 ring answer. Use 3 additional commas for each ring that your
answering machine is set to answer above 2 rings.
Distinctive Ring Service Compatibility
When you add a second phone number to your single line, the LineShare 4.1 works smoothly to process
calls without depending on access codes or transfer tones.
The phone company's Distinctive Ring service is offered in most areas across the U.S. Phone companies
offer this service under various names, check with your local phone company for details.
The LineShare 4.1 will process the additional phone numbers (ring styles) as follows:
• Standard ring
PHONE and ANS. M. ports
• Two-burst ring
FAX port
• Three-burst ring
AUX port
The factory setting for Distinctive Ring detection is OFF.
To Turn Distinctive Ring Detection ON, Perform the Following Steps:
1. Take the phone in the PHONE port off-hook
2. Press # * ( 3 beeps) 1 1 4 * ( 3 beeps) * ( 1 beep)
3. Hang up the phone
To Turn Distinctive Ring Detection OFF, Perform the Following Steps:
1. Take the phone in the PHONE port off-hook
2. Press # * ( 3 beeps) 0 1 4 * ( 3 beeps) * ( 1 beep)
3. Hang up the phone
Contact Customer Service for more information regarding operation with the Distinctive Ring service and op-
eration with other distinctive ring patterns. The LineShare 4.1 can detect any 2 of the 3 common distinctive
ring patterns. The above steps turn distinctive ring detection ON/OFF for all ports. Detection of each ring pat-
tern may be individually turned ON/OFF and assigned to any port.
Long Range Systems
10
LineShare 4.1
