UNPACKING THE LINESHARE 4.1
When you open the LineShare 4.1 box for the first time, inspect the contents. In the box you should find the
items below.
If any of these items are missing or damaged, contact the dealer where you purchased the unit, or call Cus-
tomer Service at the number listed in the warranty section in the back of this manual.
The LineShare 4.1 is a single line telephone device that can be installed on any type of modular or non-mod-
ular system that consists of one or more lines, with one or more phones. A modular system consists of phone
cables that can be connected and disconnected from a telephone device.
A non-modular system consists of cables that are hard-wired to the telephone device and cannot be dis-
connected from the equipment. A telephone installer may be required to install the LineShare 4.1 on a non-
modular system.
NOTE:
Many offices have a KSU or PBX phone system. The LineShare 4.1 works with either of these
systems. Simply follow the appropriate installation instructions provided in "Installation on a
telephone system."
PORTS ON THE LINESHARE 4.1
The rear panel of the LineShare 4.1 includes five (5) modular ports and a power input port, as shown:
1. Connect a single telephone line from a standard telephone (wall) jack to this port.
2. Connect a single line answering machine or integrated phone/answering machine to this port.
3. Depending on the installation, a single line phone, an integrated phone/answering machine, mul-
tiple phones, or a telephone system (KSU or PBX) can be connected to this port.
4. Connect your fax machine to the FAX port.
5. Connect your computer modem or computer's fax/modem to the AUX port.
The LineShare 4.1 will transfer all voice calls to the ANS. M. and PHONE ports simultaneously.
Line Share 4.1
POWER
1 LineShare 4.1
1 Telephone Line Cord
1 AC Power Adapter
12VAC
500ma
L
IN
E
I
N
A
N
S
-M
P
H
O
N
E
F
A
X
A
U
X
Long Range Systems
3
LineShare 4.1
