Long Range Systems
8
LineShare 4.1
To Return the LineShare 4.1 to the Automatic Mode, Perform the Following Steps:
1. Take the phone in the PHONE port off-hook
2. Press # * (3 beeps) 2 1 0 * (3 beeps) * (1 beep)
3. Hang up the phone
To Operate the LineShare 4.1 in the Semi-Automatic Mode, Perform the Following Steps:
1. Take the phone in the PHONE port off-hook
2. Press # * (3 beeps) 2 1 1 * (3 beeps) * (1 beep)
3. Hang up the phone
NOTE:
Extension phones not connected directly to the LineShare 4.1 will ring only 1 time if the Line-
Share 4.1 is in the Automatic mode.
In the Semi-Automatic mode, all phones will ring up to 6 times.
Special Operating Notes
Before operating the LineShare 4.1, be sure that you understand the following information concerning the
telephone equipment that is used with the LineShare 4.1.
Fax CNG tones: Most faxes send audible beep tones called CNG (CalliNG) tones. This tone is a distinct beep
that repeats every three (3) seconds. Once a fax has dialed the destination fax number, it generates this tone
while waiting for the receiving fax to answer.
For best results, callers should have your fax number programmed into their fax machine's "speed-dial"memory.
Beep Beep Beep
Not all faxes transmit this tone when they place a call. Most, but not all faxes produce this tone through their
auto-dial feature, speed-dial memory position, or by the operator pressing the fax machine's start button
after the number is dialed.
Answering Incoming Calls
You can answer incoming calls from an extension phone or from a phone device con-
nected to the ANS. M. or PHONE port. You can then conduct the call normally, for as long
as you like.
1. If, after answering a call, you hear silence on the line, the call is likely coming from
a fax that does not produce a CNG tone. Simply transfer the call to the FAX port by
entering #11 from a tone phone.
2. To transfer a voice call to the FAX port, press #11 from a tone phone.
3. To transfer a voice call to the AUX port, press #22 from a tone phone.
4. In the Semi-Automatic mode, if you hear a CNG tone or an access code for the FAX port, after an-
swering a call, simply hang up the phone after the fax has answered the line.
NOTE:
The LineShare 4.1 cannot perform rotary/pulse dialing transfers in either the Automatic or Semi-
Automatic mode.
