Lowrance HDS-10, Руководство по эксплуатации

Страница: 19 / 133

17
Pages
Configuration menu
Allows you to Add/Remove sources and adjust Bezel, Caption and
Invert Text Settings. Other configuration menu options are covered
previously in the section.
To access the Configuration menu, highlight Configuration on the
Edit Overlay menu and press enTeR .
Configuration Settings
Bezel
Adds a bezel to the data overlay gauge, making it easier to
see against certain backgrounds
Caption Allows you to add/remove data label from gauge
Invert Text Changes appearance of data overlay text
Add Source
Displays the same type of data from different sources on
the same analog gauge.
If, for example, you have multiple engines, you could
select port engine RPM as your data type and then display
starboard engine RPM using the Add source command.
Both data sources could be displayed simultaneously on
an analog gauge with two needles; one dedicated to each
source.
To use Add Source:
Select 1.
Add Source
from the Edit Overlay menu
and press enTeR . The Add source menu will
appear.
Highlight a category a press
2. enTeR . A list of
subcategories will appear.
Select the desired subcategory and press
3.
enTeR .
To remove add source data:
Highlight 1. Remove source from the Edit Overlay menu and press
enTeR . A list of sources will appear.
Select the source you want to remove and press 2. enTeR .
Add Source menu
Analog gauge
showing RPM from
two engines.