Lowrance HDS-10, Руководство по эксплуатации

Страница: 11 / 133

9
Getting Started
Selecting Chart Data
This unit supports three types of map data:
Navico, Navionics and Navico 3D (US only).
To use Navionics or Navico 3D data, you
must select it from the Chart Data menu.
To select Chart data:
Press 1. MenU twice.
Highlight 2. Chart and press enTeR .
Select 3. Chart Data and press enTeR .
Select the desired map data option and press 4. enTeR .
Selecting a Fishing Mode
Fishing modes enhance the performance of your unit by providing preset packages
of sonar settings geared to specific fishing conditions.
To select a fishing mode:
Press 1. MenU twice.
Select 2.
Sonar
and press enTeR .
Highlight 3.
Fishing Mode
and press enTeR .
Select the desired fishing mode and press 4.
enTeR .
Fishing Mode Options
General Use Bottom brown/blue background; 50% ping speed
Shallow Water
Bottom brown/white background; best suited for
depths less than 100 feet
Fresh Water Bottom brown/white background; 50% ping speed
Deep Water
Deep Blue; 50% ping speed; 50kHz is primary
transducer frequency
Slow Trolling Bottom brown/white background; 50% ping speed
Fast Trolling
Bottom brown/white background; slightly lower chart
speed
Clear Water Bottom brown/white background; 50% ping speed
Brackish Water
Bottom brown/blue background; higher ASP; slightly
lower chart speed