12
Control panel
LCD display
Start/stop button
Mute button
Menu button
Encoder
Start/Stop
Mute
Menu
Encoder
*
*
*
The control panel consists of buttons and an LCD display.
→
Buttons
→
LCD display
The LCD display can be operated in Monitoring mode or Setup Menu
Mode.
Monitoring mode : Displays the operating mode and monitors the oxy
-
gen concentration, flow rate and temperature.
If no input is made for approx. 5 minutes during therapy, the high-flow
device darkens the LCD display. When you press any button, the LCD
display lights up again.
• Press this button in standby mode to start therapy. Press this
button during the therapy to end therapy.
• Press this button to enable or disable the acoustic alarm.
• Press this button to enter the setup menu or to exit and confirm the
set menu parameters.
• The encoder has three basic functions: confirm (press), turn left,
turn right.
• In the setup menu, press the encoder to select or exit the displayed
function.
By turning left or right you select the different functions and can
then change the values or data. The data or values are applied by
pressing the encoder again.