85
Remote Viewing Interface
Configuring Alarm Notifications
Configure the settings for alarm devices (not included).
To configure alarm notifications:
1
Click the
Remote Setting
tab, and click
Alarm>Alarm.
2
Configure the following:
• Alarm In
: Select the channel that you wish to configure.
•
Alarm Type
: Select the alarm type
N/O
(normally open),
N/C
(normally closed), or select
OFF
.
•
Buzzer
: Select the "beep" duration when an event occurs.
•
Latch Time
: Select the desired latch time when an alarm triggers.
•
Show Message
: Select the checkbox so that the system displays a warning message during
an alarm recording.
•
Send email
: Select the checkbox for the system to send out email alerts during alarm
recording.
•
Full Screen
: Select the checkbox to enable the system to go into Full-screen View when an
alarm triggers.
•
Alarm out
: Select the checkbox to enable alarm out devices to activate.
•
Enable Record:
Select the checkbox to enable system recording when an alarm triggers.
•
Post Recording
: Select the desired post recording time after an alarm triggers.
•
Record Channel
: Select the channels that the system should record during an alarm trigger.
3
Click
Save
to apply your settings.
Содержание LH140
Страница 16: ...xiv...
