Display Modes
17
ENG
The unit will automatically begin loading when power is
connected to the DVR, and the ON/OFF button on the
back of the unit is switched to ON.
1.
The DVR will perform a Firmware check.
During the loading sequence, the following
information will be displayed:
•
4 or 8 Channel DVR and Firmware
Version
•
Video Type: NTSC or PAL
•
Disk0 Check: Displays information
about the connected Hard Drive
•
Read Info: Checks previously recorded
data
•
Disk1 Check: Displays information
about a second hard drive (not
available in this model).
•
CD-Drive: Displays information about
the connected CD/DVD Drive.
2.
The unit will initially load to a split screen view,
displaying all 4 or 8 cameras (depending on
model) with Camera Names and Recording
Status. The Drive Full, Date and Time are
displayed in the bottom bar. If a camera cannot
be displayed, a Video Loss Icon appears, and
the channel will display a blank blue screen
instead of an image.
Display Modes
Initial Loading Sequence
1
8CH STANDALONE DVR LOREX
(FW:2.50.85 UCODE:86)
VIDEO: NTSC
DISK0: 78533MB HD7280PLAT20
READ REC INFO … DONE
DISK 1: NONE
CD DRIVE: HL-ST DVD-RAM 1.07
[STOP] TO STOP
2
2007/10/10 01:02:03
V-LOSS
NOTE
: If a new
HARD DRIVE
is detected, the
system will prompt you to
FORMAT
the drive. If
you do not choose to format the
HARD DRIVE
, the
drive will not be detected by the system.
If you choose to
FORMAT
a drive in this way, the
drive will no longer be readable by a regular PC.
Press the
PLAY
button to format the drive, or pres
the
STOP
button to cancel the format.
8CH STANDALONE DVR LOREX
(FW:2.50.85 UCODE:86)
VIDEO: NTSC
DISK0: 78533MB HD7280PLAT20
NEW DISK
DISK1: NONE
DISK0: PRESS [PLAY] FORMAT
[STOP]
CANCEL
FORMAT … DONE.
CD DRIVE: HL-ST DVD-RAM 1.07
x
CH1
CH2
CH3
CH4
100%
4
1007/01/01 01:02:03
