Lorenz Starlight Pro Скачать руководство пользователя страница 86

Страница: 86 / 108

User Manual

Ship Icon Mode

Sets the ship icon as Steady or Blinking. The default setting is Steady.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "SHIP ICON MODE" +

'ENTER'

Simulation

Used in order to use your chartplotter without input data. It generates a display with a moving vessel,

so that you can practice using the controls in safety.

Simulation (menu)

Enables (On)/disables (Off) Activate Simulation; it is possible to insert desired values for Speed, Head-

ing, Date and Time and selects the Cursor Control function.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER'

SNR = Signal to Noise Ratio

The ratio of the magnitude of a signal that of the noise (interference).

SOG = Speed Over Ground

A calculation of the rate of movement of the ship over the ground.

Speed

The current velocity at which you are travelling, relative to a ground location.

Speed Filter

Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship, to optimize it. The

default setting is Off.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "SPEED FILTER" + 'ENTER'

Speed (Simulation)

Sets the value for speed in the Simulation mode. The default setting is 01.0 Kts.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "SPEED" + 'ENTER'

Speed (Unit)

Sets the speed unit among Kts = knots, Mph = miles per hour e Kmh = kilometers per hour. The

default setting is Kts.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'

Static Navigation

Sets up a threshold for the speed. When the speed received from the positioning device is under that

threshold, the chartplotter displays zero. The default value is 0.0 Kts.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "STATIC NAVIGATION" +

'ENTER'

Step Unit (Track)

Choose Distance (Dist) - the chartplotter can store a fix when the distance from its last stored position

is greater than a defined distance; Time - the chartplotter can store a fix after a defined time; Auto - the

software decides when storing a position, on the basis of the straight or curved track. The default

setting is Time.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER'

STR = Steering

The difference between COG and CTS. If COG is 25° and CTS is 30°, then STR is 5° Right.

Target

In order to tag on the chart the point, towards which the ship is Heading, you can use a special mark,

called Target. When the Target is placed, all navigation data are referred to this Target (see Par. 3.4,

4.1.1.4, 4.2.1.3, 4.2.2.3).

Inserting Target : place 'DEST'

Deleting Target (Basic Mode) : place cursor on 'CLEAR'

Содержание Starlight Pro













































































































Результаты поиска

Содержание Starlight Pro

Отзывы:

Похожие инструкции для Starlight Pro

Бренды по названию

Популярные бренды

Lorenz Starlight Pro, Руководство пользователя

Результаты поиска

Содержание Starlight Pro

Отзывы:

Похожие инструкции для Starlight Pro

Бренды по названию

Популярные бренды